Most people believe that wearing new shoes around the house for a few hours is enough to break them in. Unfortunately, that isn’t always the case, particularly with shoes like Converse.
Due to their stiff canvas construction, Converse shoes are notoriously difficult to break in. But that doesn’t make it impossible; you just need to know the right techniques.
Do you have trouble breaking in your converse shoes at first? It can be aggravating when your new shoes are too tight and cause discomfort in your feet. Don’t be concerned. We’ll show you a few different ways to break in your new Converse shoes so they’re more comfortable to wear.
Do Converse Stretch?
Converse shoes are a great option if you want a versatile sneaker that you can wear with anything. But, before you put on a pair of these iconic sneakers, you might be wondering if they stretch.
It’s true that Converse shoes stretch, but only to a certain extent. If you’re trying to make them more comfortable, bend repeatedly or wear them with thick socks around the house for a few hours. Another way is to wash them; the process of washing Converse will help soften the fabric and make it more pliable. You can also heat them with the hair dryer on the low setting. Finally, you could try stuffing them with socks, a towel, or newspaper to help stretch them out.
Many problems can be caused by wearing tight converse shoes, including blisters, Achilles tendonitis, bunion, heel pain, and hammertoes.
Read more on: Are Converse Comfortable?
How Long Does It Take to Break In A Pair Of Converse?
Nobody wants to be forced to wear a pair of shoes that are painful to wear.
Breaking in a pair of Converse, on the other hand, isn’t too difficult or time-consuming. In most cases, a few weeks of consistent use is all that is required before they are fully broken in. You may need up to a month to get used to Converse’s gum rubber soles, especially if you wear cushioned sneakers with arch support.
How Do I Stop My Converse From Giving Me Blisters?
Blisters are common when wearing converse shoes, but there are a few ways to avoid them. Below are a few tips you can try to prevent blisters:
- Check the size of your shoes; too big or too small can cause blisters.
- Wear sweat-wicking socks that protect your feet from friction.
- Take frequent breaks to rest your feet!
If you follow these tips, you’ll be able to wear your Converses all day without discomfort.
Also check out: Are Converse True To Size?
Are Converse Uncomfortable At First?
Yes, Converse can be uncomfortable at first. However, there are a few things you can do to stretch them out and make them more comfortable. Try wearing them with thick socks, for example. It will aid in stretching the fabric and making it easier to break in. To help stretch the shoes, you can also use a shoe stretcher or heel inserts. With a little elbow grease, your Converse will be as comfortable as ever!
How To Break In Converse?
Using the below technique, you can break into Converse with little to no out of pocket expense. The following methods may make it easier to break in your Converse shoes
Method 1. Wear Them Around The House With Thick Socks.
Wearing your new Converse sneakers around the house with thick socks is one of the best ways to break them in. After all, they won’t stretch unless you put them on and walk around in them! You only need a pair of thick shoes to get started!
- Wear thick socks first, followed by your shoes. Tie your shoelaces as you normally would.
- Now walk around your house to stretch them.
You can repeat the process as needed until they feel just right. Just don’t wear them too tightly or you’ll damage the shoes or your feet!
Method 2. Use A Hair Dryer
If you want to stretch your shoes quickly and easily, use a hair dryer. Simply doing so will loosen the material and make your shoes more comfortable to wear.
- Begin by putting on a pair of cool socks and your converse shoes.
- Heat all the areas of the shoes that feel too tight with a hairdryer.
- Warm up by flexing and wiggling your toes to move the shoe’s material as much as possible.
- Keep the shoes on until they’re cool to ensure they stay stretched out for as long as possible.
It will allow your feet to breathe more freely in your shoes and make them more comfortable.
Method 3. Bend Repeatedly
To stretch your Converse shoes properly, repeatedly bend them into a ‘V’ shape.
- Hold the heel area with one hand and the toe area with the other.
- Bend the shoe back and forth gently until you feel it stretches a bit.
- Repeat this process with the other shoe. After bending it many times, you will notice a stretch in the wider areas of Converse.
- However, be careful not to bend it too much or you may damage the material of the shoes. If done for a longer period, you may notice a crease mark on the corners.
- As a result, it is advised to do it only once or twice a week.
- The socks method works better. If you want to stretch it, get a shoe stretcher to help you do so faster.
After you’ve finished stretching both shoes, you can wear them normally. After stretching your shoes, you may notice that they are more comfortable and roomy.
Method 4. Wash Them
If your converse shoes are too small, try washing them to stretch them out. You could also stuff them with newspapers or towels to keep their shape while drying.
- Take off your shoes’ laces.
- Fill a sink or small basin halfway with cold water and a small amount of mild detergent.
- Scrub the shoes gently with a soft brush or cloth, paying special attention to any filthy areas.
- Thoroughly rinse the shoes with clean water.
- Soak shoelaces in separate buckets of water and soap.
- Set it aside to air dry. Remember to put a newspaper or towel inside to stretch and keep the shape.
You will notice a significant stretch after washing it three to four times. The reason for this is that the shoe material, i.e. the fabric, stretches out, and using newspaper or a towel inside gives it more room.
Read more on: Do Vans Stretch? 5 Easiest Way To Break In Vans
Some Other Ways To Stretch Converse
Stuffing
Stuffing your converse with a newspaper, towel, or socks can help them last longer. Fill the shoe’s toe area with any of these materials. Allow a few hours before wearing the shoes. The material will help to stretch the fabric and allow you to wiggle your toes more freely.
Shoe Stretching Tool
Stuffing your converse with a newspaper, towel, or socks can help them last longer. Fill the shoe’s toe area with any of these materials. Allow a few hours before wearing the shoes. The material will help to stretch the fabric and allow you to wiggle your toes more freely.
- Choose a shoe stretching tool that is the correct size for your shoes. It will be ineffective if it is too large or too small.
- Some shoe stretching tools are constructed of plastic, while others are constructed of metal. Choose a material that will last and not harm your shoes.
- Before using the tool, carefully read the instructions. This will keep your shoes in good condition.
Here is how you can use a shoe stretcher to break in Converse:
- Insert the shoe stretchers into the Converse.
- Turn the top knob or screw of the stretchers in a clockwise direction.
- Keep turning it until your shoes get wider in the places you want them to stretch.
- Take care not to overdo it. Overdoing it can damage your shoes, tear them apart, or stretch them further than necessary.
- Turn the knob until your hands start to feel pressure.
- Leave the stretcher for a night or even two. Put them on after the break in time. You’ll notice the difference, Viola.
How To Break Into Platform Converse?
If you like platform shoes, you should consider venturing into the world of platform Converse. This one-of-a-kind shoe style is ideal for those who want to add a little height and style to their everyday look.
Platform Converse shoes are not like your normal sneakers. They have a thicker sole and a higher heel, making them difficult to walk in if you’re not used to them. That’s why taking time when breaking into a new platform converse is fine.
You can do a few things to break into your new platform Converses. Take them out for a walk or run in short bursts to get used to the shoes. To get the most out of them, start incorporating them into your regular wardrobe and activities!
Getting started on your platform Converses will feel like a second skin to you, and you’ll be able to enjoy their comfort and style for years to come.
Wrapping Up: Do Converse Stretch?
Shoes that are too small can be extremely uncomfortable. If you’ve ever tried to break in a pair of shoes that were too small, you know how painful it can be. Can converse shoes be stretched? It all depends on how you break in your shoes and what materials they are made of.
If you want your shoes to last longer, you must take good care of them and carefully break them in. New shoes are always stiff, and they take time to break in. The best way to do this is to gradually wear them around the house until they are comfortable. You can also experiment with the other hacks mentioned in this article.
More Articles:
